Let's talk about the advantages of high-pressure steel wire winding hose.
High-pressure wire-wound rubber hose is a kind of high-pressure rubber hose assembly. It is mainly composed of rubber inner rubber layer, intermediate rubber layer, I or II or III steel wire braided r
Let's talk about itHigh pressure steel wire wound hoseWhat are the advantages
What should be paid attention to when using high pressure steel wire winding hose?
There are many kinds of steel wire wound hoses on the market. You can choose according to your own usage. When using steel wire wound hoses, you can understand the precautions. The following is an introduction to the precautions in the use of steel wire wound hoses.
When using high-pressure steel wire winding hose, there are the following precautions:
1. The bending radius of the steel wire winding hose should not be less than the given bending radius to prevent damage to the hose frame or premature damage due to excessive stretching.
2. When using, when choosing to make steel wire winding hose, the type and specification of the hose should be correctly selected according to the conditions of use, and misuse or replacement is not allowed.
3. When using steel wire winding hose, the pressure should be adjusted slowly and evenly to avoid sudden increase in pressure and damage to the pipe body.
4. If the working place changes, the steel wire winding hose should be transported away from the ground, and try not to mop the ground, so as not to scratch the outer rubber and corrode the skeleton layer.
When transporting corrosive liquids, the inside of the hose should be cleaned after use to prevent the residue from long-term corrosion of the pipe body, or the corresponding series of products should be selected.
Factors of Quality Problems of High Pressure Steel Wire Winding Hose
Hose with poor quality of high-pressure steel wire braided hose will have uneven wall thickness, too tight, too loose or too few steel wire layers. After pressurization, the hose deforms (elongates, shortens or bends) greatly. Poor air tightness of the outer layer leads to steel wire corrosion. Poor inner sealing makes it easy for high-pressure oil to enter the steel wire layer. Lack of adhesion between the adhesive layer and the steel wire layer will reduce the bearing capacity of the hose, after all, it will burst where the pipe wall is thin. In the process of manufacturing high-pressure hoses, pay attention to the factors and raw materials in the production process, and the stability of the hose quality can be guaranteed.
Advantages of high pressure steel wire wound hose
High-pressure wire-wound rubber hose is a kind of high-pressure rubber hose assembly. It is mainly composed of rubber inner rubber layer, intermediate rubber layer, I or II or III steel wire braided reinforcement layer and synthetic rubber outer rubber layer. It has excellent weather resistance. High-pressure wire-wound rubber hose, usually, high-pressure wire-wound hose and steel joint are buckled through special equipment to form high-pressure hose assembly. High-pressure wire-wound rubber hose has good product characteristics, the main product advantages are as follows:
1. It has high pressure bearing capacity and excellent pulse performance.
2. The high-pressure steel wire winding hose body is tightly combined, soft to use, and has little pressure deformation.
3. High pressure steel wire wound hose has excellent bending resistance and fatigue resistance.
4. The high-pressure steel wire winding hose has excellent oil resistance, heat resistance and aging resistance.
These are the advantages of high-pressure steel wire winding hose. If you need this hose, you can contact our company.